SIMULATION OF THE ENERGY EFFICIENCY OF A RESIDENTIAL BUILDING UNDER THE CONDITIONS OF DIFFERENT HEAT ENERGY SOURCES

Abstract

The paper presents the results of modeling the process of energy consumption in public, residential, and commercial buildings as a result of the use of various sources of thermal energy. Buildings with such energy sources as: a) a low-temperature gas boiler with a capacity of up to 120 kW for the needs of heat supply of a residential building and freon air conditioning systems for the needs of cooling the building; b) a gas condensing boiler with a thermal capacity of up to 120 kW with a temperature regime of 55/45°C for heat supply and freon air conditioning systems for cooling; c) reversible heat pumping unit of the “ground-water” type with a temperature regime of 35/28°C for the needs of the heating and cooling system and a reversible heat pumping machine with a regime of 55/45°C for the needs of hot water supply; d) a reversible air-to-air heat pump for heating and cooling systems and electric boilers for hot water supply; e) a biomass solid fuel boiler with manual fuel loading with a heat output of more than 100 kW for heat supply and freon systems for cooling; f) a fuel pellet boiler with automatic mechanized fuel loading with a heat output of more than 100 kW for building heating and cooling and freon systems for cooling; g) centralized heating system of the building. The results of calculations of the specific primary energy consumption and specific greenhouse gas emissions for each of the above heat sources are presented. It is established that biomass boilers have the lowest values of primary energy consumption and specific greenhouse gas emissions. The lowest efficiency is achieved by a district heating system with a centralized energy source. The modeling was conducted for the climatic conditions of Vinnytsia. At the same time, the disadvantage of using solid fuel boilers is the limitation of their use in densely populated areas, which is explained by the complexity of flue gas cleaning and regular biomass supply. Therefore, it has been determined that the most efficient source of thermal energy for buildings of various types to achieve the standardized energy efficiency indicators is a ground-to-water heat pump system. This installation, along with providing buildings with thermal energy, allows for cooling in the warm season, operating in reverse mode.